This high performance microliter centrifuge is perfect for applications requiring higher g-forces, such as pelleting DNA.

Technological advances, including smaller motors, compact microprocessors and lightweight construction materials, have contributed to the design of the powerful Force 1624 microliter centrifuges. Small in size, it has not sacrificed on quality and durability.

The advanced electronics maintain tight control over operating parameters. Values are set with the membrane keypad and displayed digitally. Speed can be set and displayed in rpm or rcf.

A brushless, maintenance free motor provides for fast acceleration and smooth operation. Airflow patterns within the chamber have been engineered to keep samples cool and help to reduce rotor noise.

The Force 1624 is supplied complete with removable, autoclavable rotors. Individual tube slots in the rotors support the tubes to reduce the incidence of tube breakage. The rotor accepts twenty four 1.5 ml tubes directly and smaller tubes with adapters. The Force 1624 is designed for use in refrigerated environments.

The Force 1418 is a digital microliter centrifuge designed for applications requiring up to 14,000 x g. Variable speed makes it useful for low g-force applications.

Operation of the unit is controlled by a microprocessor, while time and rep/rcf are set and displayed digitally. Airflow patterns within the chamber are engineered to keep samples cool and reduce rotor noise. A brushless, maintenance free motor provides fast acceleration and smooth operation.

The Force 1418 is supplied complete with a rotor for eighteen 1.5 ml tubes. Adapters for smaller tubes are available separately.

The small size and low profile of this centrifuge make it convenient for use on the bench, under a hood or in a refrigerated environment.

The Force 712 is a digital micro-centrifuge designed for low to medium speed applications.

Operation of the unit is controlled by a microprocessor while time and rpm/rcf are set and displayed digitally. Airflow patterns within the chamber are engineered to keep samples cool and reduce rotor noise. The centrifuge is supplied complete with a removable, autoclavable rotor. The rotor accepts twelve 1.5 ml tubes directly and smaller tubes with adapters, sold separately. The small size and low profile of the Force 712 make it convenient for use on the bench, under a hood or in a refrigerated environment.

All of the Force microliter centrifuges are supplied complete with a removable, autoclavable rotor. The 512 and 712 models accept twelve 1.5 ml tubes.

The Force Mini is a personal sized centrifuge, ideal for microfiltration, quick spin downs from the walls and caps of tubes and low speed centrifugation of tubes and strips. The centrifuge is supplied complete with two rotors. The micro-tube rotor accepts eight 1.5ml tubes. Adapters are supplied to hold 0.5ml and 0.4ml tubes. The strip tube rotor will accept four 0.2ml tube strips, such as those used for PCR, or thirty-two individual 0.2 ml tubes. Rotors are quickly and easily interchanged.

Operation of the Force Mini is controlled by the on/off power switch on the back of the unit. Alternatively, with the switch in the on position, the rotor will start spinning when the transparent lid is closed, and will stop when the lid release button is pressed. The rotors start and stop quickly.

The Force Mini requires a minimum of bench space. It is easily transported from the bench to the hood or cold room - wherever it is needed.

Perfect for drying microarray slides, the Force SpinPrep is a personal sized unit that requires minimal bench space.

The rotor in the Force SpinPrep is fitted with two slide cassettes that catch liquid shed from the slides. Each cassette accommodates one standard sized slide. Slides can be dried in approximately 10 seconds. Quick acceleration and a smooth stop eliminate splashing that can cause artifacts to appear on the slides.

Similar in operation to the Force Mini, the SpinPrep can be started and stopped by the on/off power switch. Operation of the rotor may also be started simply by closing the lid of the centrifuge while the switch is in the on position. Pressing the lid release button stops operation.

The Force SpinPrep is suitable for use in the cold room.

SelectSpin Plate Spinner is the first centrifuge designed specifically for quick and easy centrifugation of samples in microplates. Centrifuges that accept microplates are typically larger units that take up valuable space on the bench.

The unique design of the Plate Spinner, results in a compact centrifuge that has an extremely small footprint - just 6 x 6 inches. Two standard microplates are loaded through a slot in the top of the unit.

Plates are loaded vertically - surface tension keeps samples in place so there is no danger of spilling samples. Upon pressing the button on the front of the unit, the rotor quickly accelerates the microplates to 2,500 rpm. Releasing the button engages the brake and brings the rotor to a stop.

For temperature sensitive applications, the Plate Spinner may be used in a cold room.